NEC SL1100 - Page 316

Program Num-
ber
Program Name Default
11-11-16 System Numbering - Force Ringing of Incoming Intercom
Calls
723
11-12-06 Service Code Setup (for Service Access) - Switching of
Voice Call and Signal Call
712
15-02-16 Multiline Telephone Basic Data Setup - Handsfree Opera-
tion
1
20-02-12 System Options for Multiline Telephones - Forced Inter-
com Ring (ICM Call Type)
1
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Ex-
tension are Class 1
20-08-10 Class of Service Options (Outgoing Call Service) - Signal/
Voice Call
COS 01~15 = 1
20-09-05 Class of Service Options (Incoming Call Service) - Signal/
Voice Call
COS 01~15 = 1
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 721.
3. Press Speaker key to hang up.
This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 723.
3. Press Speaker key to hang up.
This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This
option is also available at Single Line Terminals.
SL1100 ISSUE 2.0
1-304
Handsfree Answerback/Forced Intercom Ringing
H