NEC SL1100 - Page 377

Related Features
Automatic Call Distribution (ACD) (V1.5 or higher)
Barge-In
Caller ID
Call Forwarding
Central Office Calls, Placing
Clock/Calendar Display/Time and Date
Direct Inward Line (DIL)
Hold
Message Waiting
One-Touch Calling
Programmable Function Keys
Transfer
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
Number
Program Name/Description Assigned Data
47-01-17 * InMail Port
Specify the system port number of the first InMail port.
The first InMail port must start with one of the following port numbers:
13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 53, 57, 61, 65, 69
1 ~ 69 (Can only use the port num-
bers provided in the description sec-
tion.)
(default = Not Assigned)
11-02-01 Extension Numbering
Assign extension numbers to the InMail ports that were assigned in
PRG 47-01-17.
The extension numbers assigned must be within your valid numbering
plan in PRG 11-01.
Maximum of 8 digits (0 ~ 9,
*
, #)
(default = Station Port No. 1 ~ 84 =
Extension Number : 101 ~ 184)
15-03-01 * SLT Signaling Type
Assign all extension numbers to be used for Voice Mail to a signaling
type of DP.
0 = DP
1 = DTMF
(default = 1)
15-03-03 * Terminal Type
Assign all extension numbers to be used for Voice Mail to a terminal
type of Special.
If the ports are left assigned as normal the Voice Mail will not be able
to receive DTMF tones.
0 = Normal
1 = Special
(default = 0)
11-07-01 * Department Group Pilot Number
Assign the Voice Mail pilot number to the group that is to be used. A
pilot number must fall within the valid numbering plan assigned in
PRG 11-01-01.
It is recommended to
not use department group 01 because by de-
fault all extensions are assigned to this group.
Maximum of 8 digits (0 ~ 9,
*
, #)
(default = Not Assigned)
ISSUE 2.0 SL1100
Features and Specifications Manual 1-365
I