NEC SL1100 - Page 497

Required Component(s)
None
Related Features
Direct Inward Line (DIL)
Ring Groups
Trunk Groups
Guide to Feature Programming
Program Num-
ber
Program Name Default
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1~84 = Priority 1~84
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1 (Trunk Group
1)
Order Numbers 2, 3, 4 = 0 (Not Specified)
All Other Routes (2~25) and Order Num-
bers (1~4) = 0
(Not Specified)
14-07-01 Trunk Access Map Setup Access Map 1~84 = Trunk Ports 1~84 as-
signed with option 7 access (incoming and
outgoing access and access when trunk is
on Hold).
15-01-02 Basic Extension Data Setup - Outgoing Trunk Line
Preference
0
15-02-10 Multiline Telephone Basic Data Setup - Ringing Line
Preference for Trunk Calls
1
15-06-01 Trunk Access Map for Extensions 1
20-10-07 Class of Service Options (Answer Service) - Automatic
Off-Hook Answer
COS 01~15 = 0
22-01-01 System Options for Incoming Calls - Incoming Call Pri-
ority
1
22-04-01 Incoming Extension Ring Group Assignment Extension 101~108 (first eight ports) ring
for incoming Ring Group 1 calls. No other
extensions ring for incoming Ring Group 1
calls.
22-05-01 Incoming Trunk Ring Group Assignment 1
23-03-01 Universal Answer/Auto Answer 0
Operation
Ringing Trunk or intercom (ICM) call:
Lift the handset or press Speaker key.
The setting assigned for PRG 15-02-10 and PRG 22-01-01 determines which call is answered first.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-485
L