Conditions
Side Tone Auto Setup
• The system needs to be idle for the Side Tone Auto Setup to be used.
• When measured trunk is busy, disconnected, outgoing call restricted, or selected trunk is not analog
trunk, ERROR will be displayed on the LCD of the programming terminal.
Default Settings
Enabled
System Availability
Terminals
None
Required Component(s)
None
Related Features
None
Programming
Program Num-
ber
Program Name Default
81-07 CODEC Filter Type 0
90-68-01 Adjustment Start No setting
90-68-02 1 digit data 0
Operation
None
SL1100
ISSUE 2.0
1-492
Maintenance
M
To Next Page
Loading...
