NEC SL1100 - Page 616

Line Preference
Guide to Feature Programming
Program Num-
ber
Program Name Default
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 84 = Priority 1 ~ 84
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4 = 0 (Not Speci-
fied)
All Other Routes (2 ~ 25) and Order
Numbers (1 ~ 4) = 0
(Not Specified)
14-07-01 Trunk Access Map Setup - Trunk Port Number Access Map 1 ~ 84 = Trunk Ports 1 ~
84 assigned with option 7 access (in-
coming and outgoing access and ac-
cess when trunk is on Hold).
15-01-02 Basic Extension Data Setup - Outgoing Trunk Line Prefer-
ence
0
15-02-10 Multiline Telephone Basic Data Setup - Ringing Line Pref-
erence for Trunk Calls
1
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-08-21 Class of Service Options (Outgoing Call Service) -Auto-
matic Trunk Seizing by Pressing Speaker Key
COS 01 ~ 15 = 0
21-02-01 Trunk Group Routing for Extensions 1
22-01-01 System Options for Incoming Calls - Incoming Call Priori-
ty
1
22-04-01 Incoming Extension Ring Group Assignment Extension 101 ~ 108 (first eight ports)
ring for incoming Ring Group 1 calls. No
other extensions ring for incoming Ring
Group 1 calls.
22-05-01 Incoming Trunk Ring Group Assignment 1
Operation
To place a call on your Prime Line:
1. Lift the handset.
You hear dial tone on your Prime Line.
- OR -
2. Press Speaker key if 20-08-21 is enabled.
You hear dial tone on your Prime Line.
SL1100 ISSUE 2.0
1-604
Prime Line Selection
P