NEC SL1100 - Page 623

Program Number Program Name Default
20-13-49 Class of Service for Options (Supplementary Service)
- BLF Indication on CO Incoming State
COS 01 ~ 15 = 0
Operation
To change a 2-digit programmable key:
1. Press Speaker key.
2. Dial 751 for 2-digit codes.
3. Press the key you want to program.
4. Enter the 2-digit key function, any additional information needed for the key and press Hold key.
For available functions codes refer to PRG 15-07 in the SL1100 Programing Manual.
To undefine a key, enter 00.
To change a 3-digit programmable key:
1. Press Speaker key.
2. Dial 752 for 3-digit codes.
3. Press the key you want to program.
4. Enter the 3-digit key function and any additional information needed for the key.
For available functions codes, refer to PRG 15-07 in the SL1100 Programing Manual.
To undefine a key, enter 000.
When a key is programmed using service code 752, that key cannot be programmed with a function
using the 751 code until the key is undefined (000). For example with a Park Key programmed by
dialing 752 +
*
04 must be undefined by dialing 000 before it can be programmed as a Voice Over
key by dialing 751 + 48.
To check the function of a programmable key:
1. Press Help key.
2. Press the programmable key.
The programmed function displays.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-611
P