NEC SL1100 - Page 635

Guide to Feature Programming
Program Number Program Name Default
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Exten-
sion are Class 1
20-08-07 Class of Service Options (Outgoing Call Serv-
ice) - Repeat Redial
COS 01~15 = 1
21-08-01 Repeat Dial Setup - Repeat Redial Count 3
21-08-02 Repeat Dial Setup - Repeat Redial Interval
Time
60 (seconds)
21-08-03 Repeat Dial Setup - Repeat Dial Calling Timer 30 (seconds)
21-08-04 Repeat Dial Setup - Time for Send Busy Tone
for ISDN Trunk
0 (seconds)
Operation
To use Repeat Redial (if the outside party you call is unavailable or busy):
1. Place a trunk call.
Listen for busy tone or ring no answer.
2. Press the Repeat Redial key (PRG 15-07 or SC 751: 29).
The Repeat Redial key flashes while you wait for the system to redial.
3. Press Speaker key to hang up.
The system periodically redials the call.
4. Lift the handset when called party answers.
When using trunks with answer supervision the Repeat Redial feature automatically cancels.
To cancel Repeat Redial:
1. Press the Repeat Redial key (PRG 15-07 or SC 751: 29). (Also refer to Last Number Redial on
page 1-476.)
ISSUE 2.0 SL1100
Features and Specifications Manual 1-623
R