NEC SL1100 - Page 652

1. At Ext101 make ICM call to Ext100.
2. Room Monitor starts automatically.
3. Press the Talk softkey at Ext101 and start ICM ring to Ext100.
4. At Ext100 Off-hook and talk to Ext101.
5. At either On-hook both Ext back to Monitoring and Monitored state.
To activate Room Monitor (multiple initiating extension case):
PRG 20-13-11: 1 (On) to Ext101 and Ext102.
PRG 20-13-55: 1 (On) to Ext100.
Ext100 is set as Room Monitored extension.
1. At Ext101 and Ext102 make ICM call to Ext100.
2. Room Monitor started automatically.
3. Press the Talk softkey at Ext100 and start Conf call with Ext101 and Ext102.
4. At Ext102 On hook backs to Monitoring state, and Ext100 and Ext101 remain ICM talk.
5. At either On Hook both Ext back to Monitoring and Monitored state.
SL1100 ISSUE 2.0
1-640
Room Monitor
R