NEC SL1100 - Page 724

OUTGOING CALL/COST
SUMMARY FOR WEEK ENDING nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 49
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
OUTGOING CALL/COST SUMMARY
FOR MONTH ENDING nn/nn/nn
TOTAL NO. OF OUTGOING PSTN CALLS: 49
TOTAL NO. OF OUTGOING ISDN CALLS: 0
NO. OF OUTGOING PSTN CALLS COSTED: 0 COST: 0
NO. OF OUTGOING ISDN CALLS COSTED: 0 COST: 0
Conditions
• The SMDR call buffer stores 320 calls. The buffer stores calls when the SMDR device is
unavailable. When the buffer fills, the oldest record is deleted to allow the new record to be saved.
• When SMDR reports are enabled using the same port as the Traffic Reporting feature (example:
147), the SMDR blocks the Traffic reports. Unplug the cable and plug it back in to allow Traffic
reports to print.
• SMDR requires a connection to the CPU LAN.
• If no answer is received, NO ANSWER is displayed regardless of the system programing for the
Caller ID display option.
• The setting in PRG 35-02-18 works regardless of the entry in PRG 35-02-15 or 35-02-17.
• When PRG 35-02-18 is set to 1, the first and second lines are sometimes separated. When the
buffer is full, the overflowed data may not be shown.
• The special characters used in the system cannot be output to the SMDR - they are converted to
(_).
• To use the PBX Call Reporting option, program system for behind PBX operation.
• SMDR can record also the Internal call. (V2.0 or higher)
• Terminal that has a tandem setting will not be included in Internal SMDR feature. (V2.0 or higher)
• Internal SMDR is not included in Summary Report (PRG 35-02-04/05/06) (V2.0 or higher)
Default Settings
Disabled
System Availability
Terminals
All Stations
Required Component(s)
None
SL1100
ISSUE 2.0
1-712
Station Message Detail Recording
S