NEC SL1100 - Page 750

Program Num-
ber
Program Name Default
20-07-05 Class of Service Options (Administrator Level) -
Set/Cancel Automatic Trunk-to-Trunk Transfer
COS 01~15 = 0
20-07-11 Class of Service Options (Administrator Level) -
Forced Trunk Disconnect (analog trunk only)
COS 01~15 = 1
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect
Trunk-to-Trunk
0 (seconds)
24-04-01 Automatic Trunk-to-Trunk Transfer Target Set-
up
999
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
3600 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
10 (seconds)
Trunk Disconnect Continue/Disconnect Codes
Program
Number
Program Name Default
14-01-25 Basic Trunk Data Setup - Continued/Discontinued
Trunk-to-Trunk Conversation
0
20-28-01 Trunk to Trunk Conversation - Conversation Continue
Code
not assigned
20-28-02 Trunk to Trunk Conversation - Conversation Discon-
nect Code
not assigned
20-28-03 Trunk to Trunk Conversation - Conversation Continue
Time
0 (seconds)
24-02-07 System Options for Transfer - Trunk-to-Trunk Transfer
Release Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect Trunk-to-
Trunk
0 (seconds)
25-07-07 System Timers for VRS/DISA - Long Conversation
Warning Tone Time
3600 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversation Dis-
connect Time
10 (seconds)
80-01-02 (35) Service Tone Setup - Basic Tone Number 0~33
0 = No Tone
33 = Default Time Slot
Operation
Method A - Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press the Conf softkey.
3. Place or answer second trunk call.
SL1100
ISSUE 2.0
1-738
Tandem Trunking (Unsupervised Conference)
T