NEC SL1100 - Page 826

Operation
To have the system page you when you have a call:
1. Press Speaker key (or lift the handset at the Single Line Terminal) and dial 713.
2. When you hear, “Start recording at the tone and press the # key when you are done.” record you
Personal Greeting and dial # when the announcement is complete.
If you already have Park and Page or Personal Greeting set up, you can dial:
3 to erase (the optionally pressing Hold key to cancel the erase)
5 to listen (then # again to listen again)
7 to re-record
3. Dial 7.
4. When you hear, “Start recording at the tone and press the # key when you are done” record your
page and dial # when the announcement is complete.
A paging chime overrides the first four seconds of an announcement. Allow a delay in announcement
recording for chime time.
5. Dial the Page Zone that should broadcast your announcement.
For example, for Internal Zone 1 dial 701 + 01, or for Combined Paging Zone, 1 dial
*
1 + 1.
6. Dial the Park and Page type:
2 = All Calls
3 = Outside Calls Only
7. Press Speaker key to hang up (or go on-hook at the Single Line Terminal).
To pick up your Park and Page:
1. Press Speaker key (or lift the handset at the Single Line Terminal).
2. Dial
**
+ your extension number.
To cancel your Park and Page:
1. Press Speaker key (or lift the handset at the Single Line Terminal).
2. Dial 713 + 3.
3. Press Speaker key to hang up (or go on-hook at the Single Line Terminal).
SL1100 ISSUE 2.0
1-814
Voice Response System (VRS) - Call Forwarding - Park and Page
V