NEC SL1100 - Page 88

Guide to Feature Programming
Program Number Program Name Default
11-07-01 Pilot# for VM group None
15-03-03 Terminal Type Normal
16-02-01 VM port group None
22-02-01 Incoming Service Type Setup 0
22-07-01 DIL Assignment - Destination Number No Setting
45-01-01 Specify VM Dpt group None
47-01-17 Start port for InMail None
Operation
Set up Built-in Automated Attendant:
< Program>
PRG 11-07-01: Pilot# for VM group
PRG 15-03-03: VM port to "Special"
PRG 16-02-01: VM port group
PRG 22-02-01: 4 (DIL)
PRG 22-07-01: Pilot number of VM
PRG 45-01-01: Specify VM Dpt group
PRG 47-01-17: Start port for InMail
Incoming call:
1. Incoming call to specified trunk.
2. Calling party is connected to Built-in Automated Attendant.
Instruction Menu
How to enter Instruction Menu:
1. Press Speaker key +SC (
*
8) of PRG 11-12-51 Call own mailbox at terminal.
- OR -
2. Press the FA key then dial 77 and mail box number.
Record the message:
1. Dial 7.
2. Record the message.
3. Dial # and finish.
Play the message:
1. Dial 5.
SL1100
ISSUE 2.0
1-76
Built-in Automated Attendant
B