NEC SL1100 - Page 91

Program Num-
ber
Program Name Default
15-01-01 Basic Extension Data Setup - Extension Name No Setting
15-01-05 Basic Extension Data Setup - Restriction for Outgoing
Disable on Incoming Line
0
15-02-07 Multiline Telephone Basic Data Setup - Automatic Hold
for CO Lines
1
15-02-21 Multiline Telephone Basic Data Setup - Virtual Exten-
sion Access Mode (When idle Virtual Extension key
pressed)
2
15-07-01 Programmable Function Keys Refer to Programming Manual.
15-08-01 Incoming Virtual Extension Ring Tone Setup 0
15-09-01 Virtual Extension Ring Assignment 0
15-10-01 Incoming Virtual Extension Ring Tone Order Setup 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension Ring Tone
15-11-01 Virtual Extension Delayed Ring Assignment 0
15-18-01 Virtual Extension Key Enhanced Options – Virtual Ex-
tension Key Operation Mode
0
15-18-02 Virtual Extension Key Enhanced Options – Display
Mode When Placing a Call on Virtual Extension Key
1
20-04-03 System Options for Virtual Extensions - CAR/SIE/Virtu-
al Extension Delay Interval
10 (seconds)
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and other Exten-
sion are Class 1
20-07-10 Class of Service Options (Administrator Level) - Pro-
grammable Function Key Programming (Appearance
Level)
COS 01~15=1
20-10-08 Class of Service Options (Answer Service) - Virtual Ex-
tension Off-Hook Answer
COS 01~15=1
20-13-27 Class of Service Options (Supplementary Service) -
Busy on Seizing Virtual Extension
COS 01~15=1
21-01-15 System Options for Outgoing Calls - Outgoing Disable
on Incoming Line (Toll Restriction)
1
23-04-01 Ringing Line Preference for Virtual Extensions 00
Operation
To answer a call ringing a Call Arrival (CAR) key:
1. Press the flashing Call Arrival (CAR) key.
To place a call to a Call Arrival (CAR) key:
1. Lift the handset, or press Speaker key.
2. Dial the CAR key extension, or press the Call Arrival (CAR) key.
The operation depends on the setting in PRG 15-02-21.
ISSUE 2.0 SL1100
Features and Specifications Manual 1-79
C