NETGEAR ProSafe GS108 User Manual

GS108T Smart Switch Software Administration Manual
Managing System Settings 3-13
v1.0, May 2007
.
Querying table entries:
a. Specify how the table is to be queried. The possible field types are as follows:
• Port: Specify the interface for which the table is queried.
• VLAN ID: Specify the VLAN ID for which the table is queried.
• MAC Address: Specify the MAC address for which the table is queried.
b. Click Query to query the table entries.
The information returned from the query is display as follows:
• VLAN ID: Shows the ID of the current VLAN.
• MAC Address: Displays the current MAC address.
• Interface Port: Indicates the interface for which the table is currently queried
• Static/Dynamic: Indicates whether the entry is static or dynamic
Removing table entries:
a. Enter the VLAN ID and MAC address of the table entry to remove.
b. Click Remove to remove the table entries.
Figure 3-12

NETGEAR ProSafe GS108 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Latency	20 μs
Dimensions (WxDxH)	235.5 x 100.8 x 27 mm
Power requirements	5 V @ 2.8 A DC
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Switch type	Unmanaged
Basic switching RJ-45 Ethernet ports quantity	8
Noise level	0 dB
Mean time between failures (MTBF)	91.500 h
Power consumption (typical)	14 W
Safety	UL (UL 1950), CUL, C-Tick
LED indicators	Link, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	760 g