GS108T Smart Switch Software Administration Manual
Configuring the Switch 4-41
v1.0, May 2007
.
All Source MACs are trusted when Trusted MAC list is empty.
• When VLAN setting is in 802.1Q mode (see “IEEE 802.1Q VLAN” on page 4-9), the filter
parameters will be {PORT, VLAN ID, SRC MAC}.
• When VLAN setting is in Port-based mode (see “Port-Based VLAN” on page 4-13), the filter
parameters will be {PORT, SRC MAC}.
You can add or delete a MAC address:
To add a MAC address:
1. Click Add on the Trusted MAC page. A screen similar to that shown below appears.
Figure 4-57
To Next Page
Loading...
