146
Release Mode
D
Frame Advance Rate
•
The frame rates for continuous low-speed and continuous high-speed
modes can also be selected using Custom Setting d1 [Continuous
shooting speed].
•
The actual frame rate when a frame advance rate of 8 fps is selected in
continuous low-speed mode is 7.5 fps.
•
The values given above for frame advance rate assume a focus mode of
AF-C, shooting mode M, a shutter speed of
1
/
250
s or faster, and default
values for all other settings. Frame advance rates may slow:
- during flash photography,
- in silent mode,
- when flicker is detected with [ON] selected for [Photo flicker reduction]
in the photo shooting menu,
- if aperture is stopped down to a very high f-number, or
- at slow shutter speeds.
•
When [ON] is selected for [Photo flicker reduction] in the photo shooting
menu (
0
518), the shooting display will briefly go dark during burst
photography.
E
Self-timer Take pictures with the self-timer (
0
152).
c
Quick release-
mode
selection
Hold the
c
button and rotate the main command
dial to select the release mode (
0
148).
•
Quick release-mode selection can be used to
choose high-speed frame capture modes with
frame rates of 30 or 120 fps (
0
149).
Mode Description
To Next Page
Loading...
