Nikon Z 9 - Attaching a Power Connector and AC Adapter

852
Compatible Accessories
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connector and
AC adapter.
1
Remove the BL-7 battery chamber
cover.
Lift the battery chamber cover latch, turn
it to the open (
A
) position (
q
), and
remove the BL-7 battery chamber cover
(
w
).
2
Connect the EH-6d AC adapter to the EP-6a power connector.
•
Pass the DC cable over the power
connector cable guide (
q
) and slide it
down until it is at the bottom of the slot.
•
Insert the DC plug into the DC IN
connector (
w
).