324
Computers: Connecting via USB
Copying Pictures to a Computer Using
NX Studio
See online help for detailed instructions.
1
Connect the camera to the computer.
After turning the camera off and ensuring that a memory card is
inserted, connect the supplied USB cable as shown.
A
Using a Card Reader
Pictures can also be copied from a memory card inserted in a third-party
card reader. You should however check that the card is compatible with
the card reader.
2
Turn the camera on.
•
The Nikon Transfer 2 component of NX Studio will start. Nikon
Transfer 2 image transfer software is installed as part of NX Studio.
•
If a message is displayed prompting you to choose a program,
select Nikon Transfer 2.
•
If Nikon Transfer 2 does not start automatically, launch NX Studio
and click the “Import” icon.
To Next Page
Loading...
