Nikon Z 9 - Choosing a Default Fine-Tuning Value

717
B
The Setup Menu: Camera Setup
Choosing a Default Fine-Tuning Value
1
Select [AF fine-tuning options] in the setup menu, then highlight
[Default] and press
2
.
2
Press
4
or
2
to fine-tune autofocus.
•
Choose from values between +20 and −20.
•
The current value is shown by
g
, the previously-selected value by
j
.
•
The larger the fine-tuning value, the farther the focal point is from
the lens; the smaller the value, the closer the focal point.
3
Press
J
to save the new value.