452
Radio AWL
Adding a Shoe-Mounted Flash Unit
Radio-controlled flash units (
0
439) can be
combined with any of the following flash units
mounted on the camera accessory shoe:
•
SB-5000: Before attaching the flash unit, set it to
radio-controlled master flash mode (a
d
icon
will appear at the top left corner of the display)
and choose group or remote-repeating flash control. Once the unit is
attached, settings can be adjusted from the camera menus or using
the controls on the SB-5000. In the case of the camera menus, use the
options listed under [Group flash options]> [Master flash] or under
[M] in the [Remote repeating options] display.
•
SB-910, SB-900, SB-800, SB-700, SB-600: Configure the flash for
standalone use. Use the controls on the flash unit to adjust flash
settings.
•
SB-500, SB-400, SB-300: Mount the unit on the camera. Adjust settings
using the [Group flash options]> [Master flash] item in the camera
menus.
To Next Page
Loading...
