210
Two-Button Reset
1 The number of shots is reset to zero. The bracketing increment for
exposure, flash, and white balance bracketing is reset to 1. The amount
for the second shot in two-shot ADL bracketing programs is reset to
[Auto].
2 If a multiple exposure is currently in progress, shooting will end and a
multiple exposure will be created from exposures recorded to that point.
If [On (series)] or [On (single photo)] is selected, the multiple exposure
mode will be reset to [Off]. [Number of shots], [Overlay mode], [Save
individual pictures (RAW)] and [Overlay shooting] are not reset.
3[On (series)] and [On (single photo)] are reset to [Off]. [HDR strength]
and [Save individual pictures (RAW)] are not reset.
Set Picture Control Auto
Active D-Lighting Off
Photo flicker reduction OFF
Metering Matrix metering
Focus mode Single AF
AF-area mode Single-point AF
Auto bracketing Off
1
Multiple exposure Off
2
HDR overlay Off
3
Option Default
To Next Page
Loading...
