336
Computers: Connecting via Ethernet or Wireless LAN
❚❚
Connecting in Infrastructure Mode
The camera connects to a computer
on an existing network (including
home networks) via a wireless
router. The computer can still
connect to the Internet while
connected to the camera.
•
Before proceeding, check that the Wireless Transmitter Utility (
0
328)
is installed on the computer.
•
Confirm that [OFF] is selected for [Wired LAN] in the network menu.
D
Infrastructure Mode
Connection to computers beyond the local area network is not supported.
You can connect only to computers on the same network.
1
Select [Connect to computer] in the
network menu, then highlight [Network
settings] and press
2
.
To Next Page
Loading...
