341
Computers: Connecting via Ethernet or Wireless LAN
7
Obtain or select an IP address.
•
Highlight one of the following options
and press
J
.
•
Press
J
to proceed when the “configuration complete” message is
displayed.
Option Description
[Obtain
automatically]
Select this option if the network is configured to
supply the IP address automatically. A
“configuration complete” message will be
displayed once an IP address has been assigned.
[Enter
manually]
Enter the IP address and sub-net mask manually.
•
Press
J
; you will be prompted to enter the IP
address.
•
Rotate the main command dial to highlight
segments.
•
Press
4
or
2
to change the highlighted segment
and press
J
to save changes.
•
Next, press
X
; a “configuration complete”
message will be displayed. Press
X
again to
display the sub-net mask.
•
Press
1
or
3
to edit the sub-net mask and press
J
; a “configuration complete” message will be
displayed.
To Next Page
Loading...
