458
Optical AWL
3
C
: Adjust quick wireless control settings.
•
Choose the balance between groups
A and B.
•
Adjust flash compensation for groups
A and B.
•
Adjust settings for group C:
- Select [M] to enable or [––] to disable
the units in group C.
- When [M] is selected, the units in
group C will fire at the chosen output.
•
Choose the channel.
-For [Channel], choose the channel (1–
4) the master flash will use for optical
remote flash control.
- If the remote flash units include an
SB-500, you must choose Channel [3].
To Next Page
