795
Alerts and Error Messages
(Exposure indicators
and shutter speed or
aperture display
flash)
Subject too bright; limits of camera exposure
metering system exceeded.
•
Lower ISO sensitivity.
•
Mode P: Use third-party ND (neutral density) filter
(filter can also be used if alert is still displayed after
following settings are adjusted in mode S or A).
•
Mode S: Choose faster shutter speed.
•
Mode A: Choose smaller aperture (higher
f-number).
Subject too dark; limits of camera exposure
metering system exceeded.
•
Increase ISO sensitivity.
•
Mode P: Use optional flash unit (flash can also be
used if alert is still displayed after following
settings are adjusted in mode S or A).
•
Mode S: Choose slower shutter speed.
•
Mode A: Choose wider aperture (lower f-number).
c
(flashes)
—
Flash has fired at full power.
Photo may be underexposed. Check distance to
subject and settings such as aperture, flash range,
and ISO sensitivity.
Alert
Problem/solution
Camera
display
Control
panel
To Next Page
Loading...
