838
Compatible Flash Units
D
Metering Areas for FV Lock
The areas metered when FV lock is used with optional flash units are as
follows:
•
Stand-Alone
•
Remote
D
Flash Compensation for Optional Flash Units
In i-TTL and auto aperture (
q
A) flash control modes, the flash compensation
selected with the optional flash unit or with [Flash control] in the camera
photo shooting menu is added to the flash compensation selected with the
[Flash compensation] item in the photo shooting menu.
Flash control mode Metered area
i-TTL 6-mm circle in center of frame
Auto aperture (
q
A) Area metered by flash exposure meter
Flash control mode Metered area
i-TTL Entire frame
Auto aperture (
q
A)
Area metered by flash exposure meter
Non-TTL auto (A)
To Next Page
Loading...
