Nortel BayStack 350 Series - Page 148

Using the BayStack 350 Series 10/100 Autosense Switch
3-40
893-00992-E
Table 3-14 describes the MultiLink Trunk Configuration Menu options.
Table 3-14. MultiLink Trunk Configuration Menu Options
Option Description
Inter-Switch Trunk
Configuration...
Displays the Inter-Switch Trunk Configuration screen (Figure 3-18
). This screen
allows you to logically connect up to eight switch ports together to form up to
four
inter-switch trunks
to another switch.
Server Trunk
Configuration...
Displays the Server Trunk Configuration screen (Figure 3-19
). This screen
allows you to logically connect up to eight switch ports together to form up to
four
server trunks
to a server.
Trunk Utilization...
Displays the Trunk Utilization screen (Figure 3-20
and Figure 3-21). This screen
allows you to monitor the bandwidth utilization of the configured trunks. You can
monitor bandwidth utilization for either type of trunk: inter-switch trunk or server
trunk.
Return to Switch
Configuration Menu
Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.