Service ManualY100250-4 8-13
8.12 POSITIONING THE ASSEMBLY ON THE HORIZONTAL MAGNETIC DEVICE/
MICR
MACHINE CONDITION:
Unimportant.
OBJECTIVE ADJUSTMENT:
Coplanarity between the magnetic device door and the slot paper conveyor.
PROCEDURE:
Hook slots (1) on the sides of the magnetic device frame onto pins (2) on the sides of the machine.
Insert the securing screws (3).
Push the magnetic device frame upward untit it rests against the paper conveyor on both right- and left-
hand sides.
Tighten the screws with a torque of 8 Kgcm.
Fig. 8-12
3
1
2
■
To Next Page
Loading...
