Olivetti PR2 E - Button and Led Functions in the Sni 4915 (4904) Emulation; Button Functions; Led Indications

Service ManualY100250-4
2-7
2.4 BUTTON AND LED FUNCTIONS IN THE SNI 4915 (4904) EMULATION
This section describes the button functions and LED indications of the PR2 E printer when in the SNI
4915 (4904) emulation.
2.4.1 BUTTON FUNCTIONS
The buttons have the following functions:
LOCAL/BREAK Toggles the printer between the on-line and off-line states
STATION 1/EJECT Assigns the printer to operator 1 and ejects the document of operator 1.
STATION 2/EJECT Assigns the printer to operator 2 and ejects the document of operator 2.
Pressing the STATION 2/EJECT button while powering on the printer prints the self-test.
2.4.2 LED INDICATIONS
When on, the LEDs inform of the following machine states:
ON Green LED, indicates that the machine is powered on.
READY Yellow LED, indicates that the printer is on-line.
LOCAL Yellow LED, indicates that the printer is off-line.
STATION 1 Yellow LED; when flashing indicates that the printer is waiting for a document from
operator 1, when on indicates that a document is present.
STATION 2 Yellow LED; when flashing indicates that the printer is waiting for a document from
operator 2, when on indicates that a document is present.
A specific console different than the one used on the standard product is available for this PR2 E
version.