Olivetti PR2 E - Button and Led Functions in the Ibm Proprinter II;X24 - Epson Lq 2550 Emulation; Button Functions; Led Indications

Y100250-4
2-8
2.5 BUTTON AND LED FUNCTIONS IN THE IBM PROPRINTER II/X24 - EPSON LQ
2550 EMULATION
This section describes the button functions and LED indications of the PR2 E printer when in the IBM
Proprinter II/X24, EPSON LQ 2550 emulation.
2.5.1 BUTTON FUNCTIONS
The buttons have the following functions:
LOCAL/BREAK Toggles the printer between the on-line and off-line states
STATION 1/EJECT Ejects the document present.
STATION 2/EJECT Not used.
Pressing the STATION 2/EJECT button while powering on the printer prints the self-test.
2.5.2 LED INDICATIONS
When on, the LEDs inform of the following machine states:
ON Green LED, indicates that the machine is powered on.
READY Yellow LED, indicates that the printer is on-line.
LOCAL Yellow LED, indicates that the printer is off-line.
STATION 1 Yellow LED; when flashing indicates that data are present in the buffer, when on
indicates that a document is present.
STATION 2 No indication.
A specific console different than the one used on the standard product is available for this PR2 E
version.