Service ManualY100250-4 9-1
9. DISASSEMBLY/REASSEMBLY PROCEDURES
For easier consultation, the disassembly procedures have been divided as follows:
- 9.2.X disassembly of the basic machine, with no option installed
- 9.3.X disassembly of the basic machine's horizontal magnetic device /MICR
Each individual disassembly procedure is described in the following way:
- Wherever possible, reference is made to previous disassembly procedures, so as to give a
backward glance at the disassembly that comes prior to the one described.
- Operation steps described in sequence.
- Notes: recall adjustments that need to be made after reassembly, precautions or warnings to
be observed.
To Next Page
Loading...
