Olivetti PR2 E - PRINT TEST CONTENTS AND EXAMPLES

Service ManualY100250-4
3-5
3.3.2 PRINT TEST CONTENTS
The print test provides the following information:
- The release and version of the firmware and character generators installed
- A graphical represetnation of 24-needle functionality (Needles test)
- The configuration of the printer
- The parameters defined for the IBM-PP and Olivetti emulations.
To stop the print test, power off the printer.
The following pages provide examples (Fig. 3-3 and Fig. 3-4) of the information provided by the tests.
The content of the test depends on the FW release installed on the printer.