Olympus EPOCH 650 - Figure 4-15 Example of Measurement Reading Boxes with Icons

DMTA-10055-01EN, Rev. A, February 2015
Chapter 4 92
To use the Reading setup page
1. Choose Meas Setup (group 3/5).
2. Press Reading Setup (P1 key).
3. Select the parameter you want to set up.
• Reading Selection
Sets the measurement reading box mode.
— Auto: Automatically makes the selection based on instrument function
— Manual: Readings correspond to the manually defined selections
• Reading1 to Reading5
Each measurement reading box is defined independently when in manual
mode. Figure 4-14 on page 91 shows an example of the measurement reading
boxes and icons that indicate what type of measurement is being displayed.
Table 13 on page 92 presents the available measurement readings.
Figure 4-15 Example of measurement reading boxes with icons
Table 13 Available measurement readings
Icon Measurement reading Description
Gate 1 Thickness Thickness in gate 1. Not used with Angle.
Gate 2 Thickness Thickness in gate 2. Not used with Angle.
Gate 1 Soundpath Distance Sound Path (Angular) distance in gate 1.
Gate 2 Soundpath Distance Sound Path (Angular) distance in gate 2.
Reading 5Reading 4Reading 2
Reading 3
Reading 1