Olympus EPOCH 650 - Convention for Identifying Menu Items and Parameters; Figure 3-5 P3 Key Selecting the Range Parameter; Parameter Adjustment

DMTA-10055-01EN, Rev. A, February 2015
Chapter 3 52
Figure 3-5 P3 key selecting the Range parameter
3.3 Convention for Identifying Menu Items and Parameters
The following convention is used to concisely refer to an element in the menu
structure:
Menu > Parameter = value
where:
Menu represents the name of the menu item (example: Meas Setup)
Parameter represents the name of the parameter (example: Unit)
Valu e represents the desired editable or selectable parameter value (example:
mm)
For example, to instruct you to set the Unit parameter to mm, in the Meas Setup
menu, the expression: Meas Setup > Unit = mm is used.
Choose Meas Setup > Unit = mm
If the value cannot be edited, the expression does not include a value:
Choose Gate1 >Zoom
3.4 Parameter Adjustment
When a parameter such as gain or range is selected, you can modify it using the arrow
keys or adjustment knob (depending on your hardware configuration).