Olympus EPOCH 650 - Figure 3-19 the Create Screen with Virtual Keypad

DMTA-10055-01EN, Rev. A, February 2015
Software Overview 69
Figure 3-19 The Create screen with virtual keypad
8. Press NEXT to complete the file naming process.
For creation of an incremental (Inc) file, you must first create a Start Point.
9. Press NEXT until the Create button is highlighted.
10. Select the &Save parameter.
The &Save parameter creates the file in memory, opens it as the active storage
location, then prompts you to save the current file parameters to the file (see
Figure 3-20 on page 70).