DMTA-10055-01EN, Rev. A, February 2015
Software Overview
53
• The Up and Down arrow keys ( ) make coarse adjustments to the value of a
highlighted adjustable parameter. The Left and Right arrow keys ( ) make
fine adjustments.
• The adjustment knob turns clockwise or counterclockwise to increase or decrease
a parameter value. The Check key ( ) toggles between coarse and fine
adjustments.
For both the navigation pad and adjustment knob configurations, you can customize
preset values for coarse adjustment (see “Editable Parameters Page” on page 102)
3.5 Escape Key
The Escape key ( ) has three primary functions:
• When in a setup page, returns to the live inspection screen.
• When in a selected menu, returns to the Basic menu item.
• When a direct access parameter (gain, range, gates, etc.) is selected, returns to
the previous menu.
3.6 Lock Key
The Lock key (knob configuration only) automatically locks adjustment of all
parameters to prevent any unwanted parameter modifications because of accidental
knob movement (see Figure 3-6 on page 54).
To Next Page
Loading...
