Olympus EPOCH 650 - Button Types; Figure 4-2 Software Display Elements in Full Screen Mode; Table 6 Button Types

DMTA-10055-01EN, Rev. A, February 2015
Chapter 4 74
To change the size of the main display
Press 2
ND
F (FULL), to set the main display to full screen mode.
Press the Escape key , to revert from the full screen to normal screen size.
Figure 4-2 Software display elements in full screen mode
4.1 Button Types
Table 6 on page 74 shows the various types of buttons found in the EPOCH 650
ultrasonic flaw detector interface.
Table 6 Button types
Type Example Description
Function Function menu item that immediately executes a
command when selected.
Measurement reading boxes
Gain setting