DMTA-10055-01EN, Rev. A, February 2015
Software Features and Options
293
Figure 11-48 Template setup page
To store and activate a template
With the Template menu active, press 2
ND
F, then select one of the templates (P1–
P5 keys) to store the template.
The template name is displayed with the symbol -A- below the name. This
indicates that the template is stored and active (see Figure 11-49 on page 294).
OR
1. Press the right arrow(P6 key) to open the Template page.
2. Select a template name, then press Store (P2 key).
3. Press to return to the live screen.
The template name is displayed with the symbol -A- below the name. This
indicates that the template is stored and active (see Figure 11-49 on page 294).
Opening the Template page to activate and store a template is necessary if the
template you want does not appear over any of the parameter keys. However, you
cannot see the live screen until after you store a template. You may have to store
again from the live screen (2
ND
F, (P1–P5) to get an accurate template image.
To Next Page
Loading...
