Olympus EPOCH 650 - Function and Parameter Keys

DMTA-10055-01EN, Rev. A, February 2015
Chapter 1 30
1.1.4 Function and Parameter Keys
The function and parameter keys are identical in both appearance and function on
both configurations of the EPOCH 650. Five function keys (F1 through F5) and seven
parameter keys (P1 through P7) are located around the display (see Figure 1-12 on
page 31). On the display, menu system software buttons appear vertically on the right
side and horizontally at the bottom (see Figure 1-13 on page 32). The function and
parameter keys allow you to individually activate a menu system software button.
2
ND
F
Accesses the second function identified above the keypad
keys when pressed and released.
Table 3 English direct-access key descriptions (continued)
Navpad
config.
Knob
config.
Function