Olympus EPOCH 650 - Display Setup Page; Figure 4-13 the Display Setup Page

DMTA-10055-01EN, Rev. A, February 2015
Software Interface 89
4.8.2 Display Setup Page
The Display setup page allows you to set parameters that control aspects of the
display (see Figure 4-13 on page 89).
Figure 4-13 The Display setup page
To use the Display setup page
1. Choose Display Setup (group 3/5).
2. Press Display Setup (P1 key).
3. Select the parameter you want to set up.
The available parameters are:
• Live A-Scan Display
Sets the live A-scan drawing mode
— Outline
— Filled