DMTA-10055-01EN, Rev. A, February 2015
Chapter 1
38
Figure 1-18 The connectors behind the protective cover
1.2.4.1 USB Client Port
The EPOCH 650 ultrasonic flaw detector comes standard with one USB port currently
used for PC client communication. The USB client port allows one-way
communication only. A peripheral device can pass commands to the EPOCH 650, but
the EPOCH 650 cannot pass commands to a peripheral device.
To connect any device (including a personal computer) to the EPOCH 650, an
appropriate USB cable is required.
Do not expose the instrument to harsh and wet environments while the computer
connection protective cover is opened. To prevent connector corrosion and damage to
the instrument, keep the computer connection protective cover closed and sealed
when no cable is connected.
USB client port
Thumb screws (2)
microSD card slot
To Next Page
Loading...
