DMTA-10055-01EN, Rev. A, February 2015
Chapter 2
46
Figure 2-2 Connecting the charger/adaptor
2. Lift the rubber seal that covers the AC charger/adaptor connector on top of the
EPOCH 650 instrument.
3. Connect the DC power plug to the DC adaptor connector (see Figure 2-3 on
page 46).
Figure 2-3 Connecting the DC power plug
AC (mains) power plug
DC power plug
AC charger/adaptor
AC power cord
DC power plug
DC adaptor connector (rubber
seal not shown)