DMTA-10055-01EN, Rev. A, February 2015
Chapter 10
214
Figure 10-22 The Edit setup menu
2. Select a file from the available list.
The CAL, INC, and SEQ file types are listed.
3. Press NEXT to highlight the field you want to edit.
4. Press Edit (P1 key) to add or change information in the field.
5. Press NEXT to select Apply.
6. Press Ok to confirm the changes.
7. Press to return to the main screen.
10.4.2.5 Copy
Copy is used to make a duplicate copy of a file saved on the instrument.
To copy a file
1. Choose Manage > Copy (group 5/5) to display the Copy page (see Figure 10-23 on
page 215).
To Next Page
Loading...
