DMTA-10055-01EN, Rev. A, February 2015
Software Features and Options
225
11. Software Features and Options
This chapter discusses the activation and operation of software features and options
for the EPOCH 650 ultrasonic flaw detector.
11.1 Defining Licensed and Unlicensed Software Features
The EPOCH 650 ultrasonic flaw detector comes standard with many software features
that expand the instrument’s capabilities beyond standard flaw detection.
The following software features are standard components of the EPOCH 650:
• Dynamic DAC/TCG
•DGS/AVG
• AWS D1.1/D1.5
The EPOCH 650 also has several software options available. These options are not
standard inclusions of the base instrument, and must be purchased and added to the
unit. These options (Template Storage, API 5UE, Waveform Averaging, Interface Gate,
Corrosion Module, and BEA), can be activated at the time of purchase of the
instrument, or can be activated remotely after purchase of the instrument.
If a software option is not activated, you do not have access to the submenu that
controls this function. Olympus can provide an activation code that is entered in the
instrument and allows access to the option. This allows the software to be activated
without having to return the instrument to a service center.
To activate a software option
1. Choose Inst Setup (group 3/5).
2. Press Software Options (P4 key) to open the Software Options setup page (see
Figure 11-1 on page 226).
To Next Page
Loading...
