Olympus EPOCH 650 - Figure 4-16 the General Setup Page

DMTA-10055-01EN, Rev. A, February 2015
Chapter 4 96
Figure 4-16 The General Setup page
To use the General setup page
1. Choose Inst Setup (group 3/5).
2. Press General (P1 key).
3. Select the parameter you want to set up:
• Language
Used to select the user interface language (English, Japanese, German,
French, Spanish, Russian, and Chinese).
• Filter Group
Used to select receiver filter group.
• Key Beep
Sounds an audible tone on every key press.
• Alarm Beep
Used to activate an audible tone when a Gate Alarm is triggered.
• Cal Lock
Used to lock access to all functions affecting calibration/waveform data. These
include: Basic, Pulser, Rcvr (receiver), and Trig settings, as well as Gain,