Olympus EPOCH 650 - General Setup Page

DMTA-10055-01EN, Rev. A, February 2015
Software Interface 95
4. Press to return to the live screen.
4.8.5 General Setup Page
The General setup page, shown in Figure 4-16 on page 96, allows you to configure
general parameters such as the user interface language and the instrument date mode.
AWS B AWS reference indication value B.
AWS C AWS sound path correction value C.
Gate1 Ref dB-Current Amp Comparison value in dB measuring the
difference between the gate 1 echo height
and the reference gain.
Gate2 Ref dB-Current Amp Comparison value in dB measuring the
difference between the gate 2 echo height
and the reference gain.
Gate1 − IF Gate Gate 1 thickness minus interface gate
thickness (echo-to-echo measurement).
Gate2 − IF Gate Gate 2 thickness minus interface gate
thickness (echo-to-echo measurement).
GateIF Thickness Thickness in interface gate. Not used with
Angle.
Table 13 Available measurement readings (continued)
Icon Measurement reading Description