DMTA-10055-01EN, Rev. A, February 2015
Software Features and Options
289
Figure 11-45 B-Scan setup page
11.9.7.3 B-Scan Acquisition and Control
In the live screen, use the B-scan controls (displayed over the parameter keys) to
acquire your B-scan image.
•Start (Stop)
Use this control to start or stop the acquisition of your B-scan image
In Bi-Directional or Uni-Directional Encoder Modes, acquisition of the B-scan does
not begin until the attached encoder is moved. In Timed Encoder Mode, acquisition of
the B-scan begins as soon as you press the Start button (P1 key).
•New Scan
Use this control to start a new B-scan. All current B-scan data is erased.
•Setup
Returns you to the B-scan setup screen. All current B-scan data is erased.
• Save Min
To Next Page
Loading...
