Omron CQM1H - PROGRAM - Specifications

139
Analog I/O Board Section 2-5
2-5-6 Specifications
Analog Inputs: Input Data and Converted Values
Analog Outputs: Settings and Output Data
Applications Examples The Board uses no special instructions. MOV(21) is used to read analog input
values and set analog output values.
−10 to +10 V 0 to +10 V
Converted value
(12-bit binary data)
Converted value
(12-bit binary data)
Analog input signal
Analog input signal
0 to 5 V or 0 to 20 mA
Converted value
(12-bit binary data)
Analog input signal
−10 V 5 V
+5 V +10 V
0 V 5 V 10 V
0 V
0 mA
2.5 V
10 mA
5 V
20 mA
−10 to +10 V
Setting (12-bit
binary data)
Analog output signal
0 to 20 mA
Analog output signal
Setting (11-bit
binary data)
+10 V
+5 V
5 V
10 V
0 V
20 mA
10 mA
0 mA