Omron CQM1H - PROGRAM User Manual

461
Host Link Commands Section 6-5
Parameters Name, TC Number (Command)
In “Name,” specify the name of the instruction, in four characters, for changing
the SV. In “TC number,” specify the timer/counter number used for the instruc-
tion.
Operand, SV (Response)
In “Operand,” specify the name that indicates the SV classification. Specify
the name in four characters. In “SV,” specify either the word address where
the SV is stored or the constant SV.
Note Only the CQM1H-CPU61 CPU Unit has an EM area.
6-5-23 STATUS READ –– MS
Reads the PC operating conditions.
Command Format
Response Format An end code of 00 indicates normal completion.
Instruction name Classification TC number range
OP1 OP2 OP3 OP4
T I M (Space) TIMER 0000 to 0511
T I M H HIGH-SPEED TIMER
TTI MTOTALIZING TIMER
C N T (Space) COUNTER
C N T R REVERSIBLE
COUNTER
Operand Classification Constant or
word address
OP1 OP2 OP3 OP4
C I O (Space) IR or SR 0000 to 0252
L R (Space) (Space) LR 0000 to 0063
H R (Space) (Space) HR 0000 to 0099
A R (Space) (Space) AR 0000 to 0027
D M (Space) (Space) DM 0000 to 6655
DM* (Space) DM (indirect) 0000 to 6655
E M (Space) (Space) EM 0000 to 6143
E M * (Space) EM (indirect) 0000 to 6143
C O N (Space) Constant 0000 to 9999
@ MSx 10
0
x 10
1
*
↵
Node No. Header
code
TerminatorFCS
@ MS x 16
2
x 10
0
x 10
1
x 16
1
x 16
0
x 16
3
x 16
0
x 16
1
*
↵
Node No. Header
code
Status dataEnd code TerminatorFCS
Message
16 characters

Omron CQM1H - PROGRAM Specifications

General

I/O Capacity	Up to 512 points
Power Supply	100 to 240 VAC, 50/60 Hz or 24 VDC (depending on model)
Instruction Set	Basic and advanced instructions
Operating Temperature	0 to 55°C
Program Capacity	7.2K to 15.2K steps
Communication Ports	RS-232C
Expansion Slots	Up to 3 expansion units
Type	Programmable Logic Controller (PLC)
CPU Type	RISC
Program Memory	7.2K to 15.2K steps
I/O Points	512 max
Expansion Capability	Up to 3 expansion units
Data Memory	RAM (battery backup)