412
Network Instructions Section 5-29
Flags ER: Indirectly addressed EM/DM word is non-existent.
(Content of *EM/*DM word is not BCD, or the EM/DM area boundary
has been exceeded.)
The number of send words exceeds 990 words for a Controller Link
Unit.
There is no Controller Link Unit installed.
The received data exceeds the data area boundary.
5-29-3 DELIVER COMMAND: CMND(––)
Limitations C through C+5 must be within the same data area and must be within the val-
ues specified below. To be able to use CMND(––), the system must have a
Controller Link Unit mounted.
Description When the execution condition is OFF, CMND(––) is not executed. When the
execution condition is ON, CMND(––) transmits the FINS command beginning
at word S to the specified node on the Controller Link System and receives
the response.
C3 64
00 03
DM 0100
DM 0101
DM 0109
C+2: DM 0302
15 0
@RECV(98)
DM 0100
DM 0200
DM 0300
00000
Node 3
Address Instruction Operands
00000 LD 00000
00001 AND AR 0209
00002 RECV(98)
DM 0100
DM 0200
DM 0300
AR 0209
00 0A
00 00C+3: DM 0303
C+1: DM 0301
C: DM 0300
DM 0200
DM 0201
DM 0209
S: First command word
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
D: First response word
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
Operand Data Areas
C: First control word
IR, SR, AR, DM, EM, HR, TIM/CNT, LR
Ladder Symbols
CMND(−− )
S
D
C
@CMND(−− )
S
D
C
To Next Page
Loading...
